© Val Thorens
Ski helmets guide
Within the last ten to fifteen years there has been a shift in the ski and snowboard industry towards helmet wearing, especially amongst children, indeed it's rare to see children on the pistes without one. Whether you're buying for the first time or yours has seen better days, read our guide before you buy.
We know that collisions and falls don't happen every day, but they do happen. And remember, a helmet is only useful if you actually wear it. Especially with children, it's worth getting them involved in the buying process to ensure some compliance with actually wearing it.
Buying in store
Whether it's for you or your children, here are some tips to take with you:
- Try on as many helmets as you can.
- The helmet should fit snugly on the head, but not be too tight when the fit system is loose.
- Find one with an adjustable dial at the back so you can customise the fit.
- The helmet should sit level and not more than two fingers space (about one inch) from the top of the eyebrows. It should protect the forehead without hindering vision.
- Adjust the straps so they sit just below the earlobes.
- Try on the helmet with your/their goggles - there should be no gap between the top of the goggles and the helmet to prevent cold air and snow from entering. Not all goggle/helmet combinations work together and some helmets come with a goggle option, which is a good idea if you're looking for the perfect fit.
- Wiggle the helmet back and forth without closing the chin strap. If it stays in place and doesn't move about, it's a good fit. Remember the chin strap is only to keep the helmet on, it is not part of the fit.
Note: something to be aware of is head shape. Some people have rounder heads, others more oblong, and helmets will fit them differently. For those with round heads, you may notice it's difficult to find a helmet that fits well (even if the measurements look correct). In this case look for Asian fit ski helmets if you can, they're actually designed for rounder head shapes. Anon and Smith both make helmets for a rounder head.
If buying online you'll need to measure yours or your child's head. Take a tape measure and wrap around their head one inch above their ears and eyebrows. Make note of the measurements in both cm and inches - all manufacturers show sizes in terms of these measurements.
Note: not all helmet and goggle combinations work together, but some websites list which helmets match which goggle brands and you can search for your brand in advance of any online helmet purchases.
Technologies to know about
Traditional helmets tend to use EPS (expanded polystyrene) or EPP (expanded polypropylene) foam liners. These liners provide a high level of protection, but more durable alternatives are emerging. You will see a number of additional technologies in helmet safety when you're shopping for helmets, and they add an often considerable amount to the price. Mostly these technologies originated in bike helmet manufacturing, but have proven to be easily transferable to the ski/snowboard helmet market. Here's some info on what they mean and what they do.
Short for Multi Impact Protection System, this is a safety feature that's added to many higher end helmets and is becoming a lot more commonplace in the industry. Developed in 1996, Mips is designed to help protect the brain from a fall at an angle (this is how most skiers/snowboarders fall). Allowing the helmet to move around on the head with a layer that sits between the liner and the shell, this low friction layer lessens the trauma of any impact, resulting in fewer and less big brain injuries. These helmets do cost more than those without, but if you can afford it this is one safety feature that's worth investing in - we only have one brain after all.
A new technology that's revolutionising helmet safety. It protects against rotational impacts, like MIPS, but also linear impacts. It "behaves like a network of hundreds of interconnected shock absorbers connecting your head and the outer shell of the helmet, distributing the impact energy through its network of cells". Whilst there isn't a lot of data currently, early signs point to its being significantly safer than Mips alone. For example Mips is considered 3-5 times safer than a non-MIPS helmet, whereas WaveCel is thought to be up to 40 times safer than Mips. Something to know is that WaveCel helmets do fit a little closer to the head and they usually have a BOA dial to allow adjustment. The helmet shape is more rounded.
Developed by Atomic for their helmets, it stands for Atomic Multi-directional Impact Deflector and is similar to Mips in many ways. The dual density protection foam absorbs shocks and impacts, thereby providing better protection against angled impacts.
Despite being early adopters of Mips, POC have begun implementing their own version called SPIN - Shearing Pads Inside. Similar in principle to Mips, it consists of a series of silicone pads built into the fabric padding that allows for movement of the helmet in much the same way.
What else to look for
On top of fit and safety innovations, here are few more things to consider:
- Good ventilation - especially important for sweaty heads.
- Magnetic closures at the chin strap - good for when you're wearing your gloves and help prevent you from pinching your child's neck.
- Adjustable dial - to customise fit and allow some room for growth.
- Removable liner - one that can be washed extends the longevity of the helmet.
- Ensure the helmet meets safety standards. You will find a sticker inside the helmet and you should look for either ASTM F2040, CE EN 1077 or Snell RS-98 (the last one is the most stringent helmet safety standard). These stickers suggest that it has passed tests for shock absorption, penetration resistance and durability, plus a number of other tests.
Good to know
- There is no difference between a ski and snowboard helmet. Sometimes 'snowboard' helmets can be a little more rounded in style, akin to a skateboard helmet.
- Kids can wear an adult helmet, it's all about head size and volume. Never buy a child a helmet they can 'grow into'...the helmet needs to fit them today.
- Wearing a helmet isn't the law (apart from in a few countries), but for most ski schools it is now mandatory for children.
- Ideally you wouldn't put a hat under the helmet. On days when it's super cold opt for a thin hat or balaclava if you feel you/your child needs extra protection from the cold.
- Helmets are surprisingly warm, and are often too hot on warm days. That's why vents are so important, and washable liners are a bonus.
- Helmets for babies - these can be tricky to find. Try GIRO for kids in XS. If your child is 12 months or less they shouldn't wear one, their neck muscles aren't developed enough.
- If you see helmets with hard, rather than soft ear covers, these tend to be racing helmets - do not buy them unless you/your child is into ski racing.
Do helmets have an expiry date?
The rule of thumb here seems to be you should discard your helmet after 2-5 seasons, or three years since its purchase, whichever comes first.
Generally the EPS foam inside remains intact for up to 30 years, but it's the shell that gets degraded and weakened by UV, general wear and tear, sweat and salt. Some helmets come with an expiry date, and if so use that as your guide. Other ways to tell include:
- The foam looks compressed
- Chips and/or cracks on the exterior
- Faded colouration
- Straps in bad shape and don't have any stretch left
Also worth noting is that a helmet constructed with less durable materials will breakdown faster than a well-made, quality helmet. The frequency and severity of falls whilst wearing it will determine its longevity. You should immediately replace your helmet if you have any accidents where your helmet was impacted. Helmets purchased on sale are likely to be older models, which reduces the probability that they may meet any recent minimum safety standards - always check.
When it comes to hiring a helmet for yourself or your children when you go on your ski holiday, we would say this is a big, fat no! You will not know when the helmet was manufactured or how long it's been hired out. It may have been involved in crashes, badly handled, left rolling around in the boot of someone's car, or dropped, all of which compromises its safety, and therefore yours!
Tips on maintaining your helmet
When you're done with your ski holiday, you may simply chuck it into your luggage and then into the garage when you get home. But a little bit of care on your part can help keep your helmet in tip top condition and ready to go again.
- Clean regularly, using mild soap and water and then dry with a soft cloth. Do not use strong detergents or solvents.
- Wax for added corrosion/water protection.
- Store away from heat such as a hot radiator or sunshine through a car window.
- Replace worn out straps.
So what brands should you look for?
Whilst there are a number of brands out there making helmets, these are the ones that stand out for us as worth looking at:
Founded in the 1980s as a bike brand with a focus on design solutions that "enhance experience and performance", in the nineties they designed a lightweight snow helmet with vents. Sceptics laughed, but riders embraced it and helmets became a normal sight on the mountain in winter. GIRO website
In 1965, an orthodontist who was a keen weekend skier hand built goggles in his garage, selling them on weekend ski trips to Utah and Colorado. In 1969. he introduced the Smith Original Ski Goggle to the market, and so from these humble beginnings was born one of the main players in the trade today. In 2006, Smith entered the helmet market. SMITH website
Born in 1947, in Annecy, France, Salomon was predominantly a ski brand. In the late nineties they expanded into snowboards, and then into running shoes in the early 2000s. Now owned by Chinese sports group Amer Sports, its sister brands include Wilson, Atomic, Sports Tracker, Suunto, Precor and Arc'teryx. SALOMON website
Founded in Sweden in 2005, its focus was the ski racing market with a mission to 'protect lives and reduce the consequences of accidents for athletes and anyone inspired to be one'. A reputation for breaking with convention, exploring new ideas and innovating to improve protection for all, they have become a leading manufacturer of helmets, eyewear, body armour, apparel and accessories in snow sports and cycling. POC website
Part of the behemoth that is Burton snowboarding, Burton created Anon Optics in 2001 as their in-house goggles brand, that would also make helmets and other apparel. Some Anon helmets come with WaveCel technology in both youth and adult sizes, but you will pay for this luxury. ANON website
With its roots in Norwegian skateboarding and kayaking, it was officially founded in 2000 with local boy and snowboard legend Terje Hakonsen on board. Swiftly moving from a garage operation to the international scene, since 2001 they have consistently won awards for their function and design innovation, and to this day continue to work to push boundaries with their products regularly appearing in the 'best of' guides. SWEET PROTECTION website
France, Les 2 Alpes